Jiutian bean dregs dehydration and drying treatment production line can help high-humidity bean dregs to be quickly dehydrated and dried.

1. The initial water content of bean dregs is generally about 85%. The first step to quickly dry bean dregs is to first pass the bean dregs through the bean dregs dehydrator to remove most of the free water.

2. Send the wet bean dregs with a water content of 55~60% into the bean dregs dryer, and quickly dry them in a special drying system with a dispersing device. During the drying process, the bean dregs are quickly dehydrated on the inclined lifting board and heat medium, and dried to the desired dryness.

It should be noted that the specific dehydration method and operation should be determined according to the actual situation and the characteristics of the equipment. During the dehydration process, the operation safety should be ensured, and appropriate temperature control and monitoring should be carried out according to the needs, so as to achieve the purpose of rapid dehydration of bean dregs. At the same time, it is recommended to refer to the suggestions of professionals and make adjustments according to the actual situation.